Transmission Mount Replacement Side
Transmission Mount Replacement Side (W/L61)Removal Procedure
1. Remove the battery and tray.
2. Using a floor jack and a block of wood, support the powertrain.
3. Remove the left transmission mount to bracket bolts
4. Remove the left transmission mount to body bolts.
5. Remove the transmission mount from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the left transmission mount to the vehicle.
Tighten the left transmission mount to body bolts to 25 Nm (16 ft. lbs.).
2. Install the left transmission mount to body bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Remove the floor jack supporting the engine.
4. Install the battery and tray. Refer to Battery Tray Replacement in Service Precautions.