Operation CHARM: Car repair manuals for everyone.

Intake Manifold Tuning Valve Actuator Replacement




Intake Manifold Tuning Valve Actuator Replacement

Removal Procedure





Caution: Refer to Battery Disconnect Caution Battery Disconnect Caution.

1. Disconnect the negative battery cable.
2. Disconnect the throttle cable by opening the throttle and moving the cable through the release slot.




3. Disconnect the vacuum hose from the intake manifold tuning (IMT) valve actuator.

Important: Ensure the IMT valve flap is closed before removing the IMT valve.


4. Remove the IMT actuator and the IMT valve.

Installation Procedure





Notice: Refer to Fastener Notice Fastener Notice.

1. Install the IMT valve and the IMT actuator.

* Tighten the IMT valve retaining bolts to 12 Nm (106 lb in).
* Tighten the IMT actuator retaining bolts to 12 Nm (106 lb in).

2. Connect the vacuum hose to the IMT actuator.




3. Connect the throttle cable.
4. Connect the negative battery cable.