68. Engine Flywheel Installation

Engine Flywheel Installation

^ Tools Required
- J 38122-A Harmonic Balancer Holder
- J 45059 Angle Meter





1. Install the flywheel.
2. Install the new bolts.

3. Notice:
Fastener Notice in Cautions and Notices.

Holding the crankshaft damper with the J 38122-A , tighten the bolts evenly.

Using the J 45059 , tighten the bolts to 53 Nm (39 ft. lbs.), plus 25 degrees using the J 45059 .