Sunshade Replacement
Sunshade Replacement
Removal Procedure
1. Remove the sunshade (3) from the sunshade anchor.
2. Rotate the sunshade (3) parallel to the door and pull in a downward motion in order to disconnect the sunshade retention clip.
3. Remove the sunshade (3) from the sunshade bezel (2).
4. Disconnect the electrical connector if required.
5. Remove the sunshade bezel (2) from the headliner (1) if required.
Installation Procedure
1. Install the sunshade bezel (2) to the headliner (1) if required.
2. Connect the electrical connector if required.
3. Align the sunshade (3) parallel to the door.
4. Install the sunshade (3) to the sunshade bezel (2). Push up on the sunshade (3) and rotate the sunshade toward the front glass in order to connect the retention clip.
5. Reattach the sunshade (3) to the sunshade anchor.