Operation CHARM: Car repair manuals for everyone.

Battery Negative Cable Disconnect/Connect Procedure

REMOVAL PROCEDURE
1. Turn OFF all the lamps and the accessories.

CAUTION:
- Refer to SIR Caution in Service Precautions.
- Refer to Battery Disconnect Caution in Service Precautions.


2. Place the ignition switch in the OFF position.




3. Disconnect the battery negative cable from the battery.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

IMPORTANT: Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the battery cable to the battery terminal.




Connect the battery negative cable to the battery.

Tighten
Tighten the bolt to 16 N.m (12 lb ft).