Operation CHARM: Car repair manuals for everyone.

Removal and Replacement



VALVE ROCKER ARM AND PUSH ROD REPLACEMENT

Removal Procedure

1. Remove the valve rocker arm cover.
Left Valve Rocker Arm Cover Replacement (Left)
Right Valve Rocker Arm Cover Replacement (Right)





2. Remove the rocker arm bolts and discard.

3. Remove the valve rocker arms and the pushrods.

Installation Procedure





1. Coat the ends of the push rods and rocker arm friction surfaces using using prelube GM P/N 12345501 (Canadian P/N 990404) or the equivalent.

Important: The intake valve push rods measure 144 mm (5.68 inch) in length. The exhaust valve push rods measure 152.5 mm (6.0 inch) in length.

2. Install the push rods in their original location. 79. Valve Rocker Arm and Push Rod Installation





3. Coat the rocker arm friction surfaces using camshaft and lifter prelube GM P/N 12345501 (Canadian P/N 992704) or the equivalent.

4. Install the new valve rocker arm bolts. 79. Valve Rocker Arm and Push Rod Installation

Tighten
Tighten the bolts to 32 Nm (24 ft. lbs.).

5. Install the valve rocker arm cover.
Left Valve Rocker Arm Cover Replacement (Left)
Right Valve Rocker Arm Cover Replacement (Right)