Operation CHARM: Car repair manuals for everyone.

Air Distribution Duct Replacement (IP/RH/Defrost)

REMOVAL PROCEDURE




1. Remove the cross vehicle beam.
2. Remove the right defrost instrument panel air duct retaining bolts.
3. Remove the right defrost instrument panel air duct from the cross vehicle beam.

INSTALLATION PROCEDURE




1. Install the right defrost instrument panel air duct to the cross vehicle beam.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the air duct center screw.

Tighten
Tighten the air duct center screw to 1.8 N.m (16 lb in).

3. Install the air duct bolts.

Tighten
Tighten the air duct bolts to 10 N.m (89 lb in).

4. Install the cross vehicle beam.