Air Distribution Duct Replacement (IP/LH/Center)
REMOVAL PROCEDURE1. Remove the Instrument Panel (IP) trim pad.
2. Remove the left center IP air duct retaining bolts.
3. Remove the left center IP air duct from the cross vehicle beam.
INSTALLATION PROCEDURE
1. Install the left center air duct to the cross vehicle beam.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the air duct bolts.
Tighten
Tighten the air duct bolts to 10 N.m (89 lb in).
3. Install the instrument panel.