Operation CHARM: Car repair manuals for everyone.

High Mounted Stop Lamp Replacement

REMOVAL PROCEDURE

IMPORTANT: The high mounted stoplamp bulbs are not serviceable and the high mounted stoplamp must be replaced as a unit.




1. Open the rear compartment.
2. Disconnect the electrical connector from the high mounted stoplamp.
3. Remove the screws (1) from the high mounted stoplamp.
4. Remove the high mounted stoplamp from the rear spoiler, pulling the wiring harness from the rear compartment lid.

INSTALLATION PROCEDURE




1. Install the wiring harness to the rear compartment lid.
2. Install the high mounted stoplamp to the rear spoiler,

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the screws (1) to the high mounted stoplamp.

Tighten
Tighten the high mounted stoplamp screws to 2 N.m (18 lb in).

4. Connect the electrical connector to the high mounted stoplamp.
5. Close the rear compartment.