| Crankshaft End Play | 0.0034 - 0.0095 |
| Flange Runout Maximum | 0.00120 in |
| Flywheel Fit | 0.0000 - 0.0005 in |
| ID Balancer | 1.2992 - 1.3004 in |
| ID of Seal Diameter on Crank | 3.2210 - 3.2299 in |
| Main Bearing Journal Diameter | 2.3622 - 2.3631 |
| Out of Round | 0.0002 |
| Out of Round Maximum | 0.0002 |
| Rod Bearing Inside Diameter | 1.8898 - 1.8914 |
| Rod Bearing Journal Diameter | 1.8887 - 1.8897 |
| Runout of Crankshaft at the Flywheel Flange Maximum | 0.002 |
| Runout of Crankshaft Maximum | 0.002 |
| Runout of Seal Surface | 0.002 in |
| Straightness, Taper | 0.0003 |
| Stroke of Crank | 3.70 in |
| Supported on Front and Rear Journals Clearance to the Crankshaft Position Sensor | 0.0303 - 0.0697 |
| Timing Gear Fit to Crankshaft Snout | 1.3004 - 1.3016 in |
| Width, Main Thrust Bearing Journal No. 3, Including Fillets | 1.0959 - 1.0989 in |