Front Door Window Regulator: Service and Repair
Front Side Door Window Regulator Replacement
Removal Procedure
1. Remove the front door window. Refer to Front Side Door Window Replacement (Service and Repair) .
2. Disconnect the power window motor electrical connector (2), if equipped.
3. Remove the following components from the door:
* The 5 bolts (4)
* The nut (3)
* The window regulator (1)
Installation Procedure
1. Apply a multipurpose grease to all lubrication and sliding points.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the window regulator (1) to the door. Secure the regulator with the 5 bolts (4) and the nut (3).
Tighten the regulator bolts and nut to 8 N.m (71 lb in).
3. Connect the power window motor electrical connector (2), if equipped.
4. Install the front door window. Refer to Front Side Door Window Replacement (Service and Repair) .