Operation CHARM: Car repair manuals for everyone.

Window Guide Channel Replacement - Center (Rear Door)

REMOVAL PROCEDURE




1. Remove the rear side door trim.
2. Loosen the rubber window run channel along the center guide channel (3).
3. Loosen the rear door weatherstrip in order to access the center guide channel screw (1).
4. Remove the screw (1) that retains the center guide channel (3).




5. Remove the following components from the rear door (4):
^ The 2 bolts (1 ,3)
^ The center guide channel (2)

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the center guide channel (2) to the rear door (4). Secure the guide channel with the 2 bolts (1,3) and the screw.

Tighten
Tighten the center guide channel bolts to 8 N.m (71 lb in).




2. Install the rubber window run channel into the center guide channel (3).
3. Reposition the rear door weatherstrip to the door (2).
4. Install the rear side door trim.