Operation CHARM: Car repair manuals for everyone.

4T40-E/4T45-E Automatic Transaxle

Removal Procedure

Caution: Refer to Vehicle Lifting Caution in Service Precautions.

1. Raise and suitably support the vehicle.
2. Remove the left front wheel and tire assembly.
3. Remove the left front splash shield.





4. Install a jackstand and a block of wood to support the transaxle.





5. Remove the expansion bolt from the transmission mount.





6. Remove the four transmission mount bolts.
7. Remove the mount.

Installation Procedure
1. Transfer the mount bracket to the new mount.
2. Position the mount and start the four bolts into the threads.

Notice: Refer to Fastener Notice in Service Precautions.

3. Tighten the mount bolts.
^ Tighten the bolts to 66 Nm (41 ft. lbs.).





4. Install the mount expansion bolt.
^ Tighten the mount thru-bolt to 55 Nm (41 ft. lbs.).





5. Remove the jackstand and the wood block.
6. Install the left splash shield.
7. Install the left tire and wheel assembly.
8. Lower the vehicle.