Sedan
REMOVAL PROCEDURE1. Remove the front seat belt sleeve plug.
2. Remove the retractor side belt sleeve bolt.
3. Pull on the bottom of the shoulder belt pillar guide cover, in order to remove the shoulder belt pillar guide cover.
4. Remove the shoulder belt pillar guide bolt.
5. Remove the center pillar trim panel.
6. Remove the carpet retainer.
7. Remove the shoulder belt retractor bolt.
8. Lift and pull the retractor in order to disengage the retractor.
9. Remove the retractor from the vehicle.
INSTALLATION PROCEDURE
IMPORTANT: Remove any twists in the seat belt webbing before final assembly.
1. Install the retractor to the vehicle.
2. Insert the top of the retractor into the mounting slots.
Pull down the top of the retractor.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the shoulder belt retractor bolt.
Tighten
Tighten the shoulder belt retractor bolt to 42 N.m (31 lb ft).
4. Install the carpet retainer.
5. Install the center pillar trim panel.
6. Install the shoulder belt pillar guide bolt.
Tighten
Tighten the shoulder belt pillar guide bolt to 28 N.m (21 lb ft).
7. Install the shoulder belt pillar guide cover.
8. Inspect the shoulder belt pillar guide cover for broken tabs. Replace any cover containing broken tabs.
9. Install the retractor side belt sleeve bolt.
Tighten
Tighten the retractor side belt sleeve bolt to 42 N.m (31 lb ft).
10. Install the front seat belt sleeve plug.
11. Inspect for proper operation of the seat belt assembly. Refer to Operational and Functional Checks.