Sunfire GT
REMOVAL PROCEDURE
1. Disconnect the electrical connector from inside the rear compartment.
2. Remove the retaining screws (1).
3. Remove the assembly.
4. Twist the lamp socket to remove.
5. Pull the bulb to remove from the socket.
INSTALLATION PROCEDURE
1. Install the lamp sockets.
2. Install the lamp assembly.
NOTE: Refer to Fastener Notices in Service Precautions
3. Install the retaining screws (1).
Tighten
Tighten the retaining screws to 2 N.m (18 lb in).
4. Connect the electrical connector.