Operation CHARM: Car repair manuals for everyone.

Radiator Hose Replacement - Inlet


Removal Procedure





1. Drain the cooling system.
2. Disconnect the intake air temperature (IAT) sensor electrical connector.





3. Remove the air intake duct resonator.





4. Remove the inlet hose from the water outlet.





5. Remove the inlet hose (1) from the radiator.

Installation Procedure





1. Install the inlet hose (1) to the radiator.





2. Install the inlet hose to the water outlet.





3. Install the air intake duct resonator.





4. Connect the IAT sensor electrical connector.
5. Fill the cooling system.