Operation CHARM: Car repair manuals for everyone.

Infl Rst Steering Wheel Module Replacement









Removal Procedure

Caution: Always disable the SIR system when servicing the SIR components, or the SIR wiring. Failure to follow the disabling procedures could result in possible deployment, personal injury, or otherwise unneeded SIR system repairs.

1. Disable the SIR system.
2. Place the front wheels in the straight ahead position.
3. Remove the steering wheel opening covers (4, 8).
4. Loosen the Steering Wheel Inflatable Restraint Module bolts (3, 9) to unfasten the Steering Wheel Inflatable Restraint Module (1).
5. Release the Inflator Module Connector Position Assurance (3).
6. Disconnect the Steering Wheel Inflator Module connector (1).
7. Remove the Steering Wheel Inflatable Restraint Module (2).

Installation Procedure

Caution: Refer to Inflator Module Handling And Storage Caution in Cautions and Notices.

1. Connect the inflator module electrical connector (1).
2. Connect the Inflator Module Connector Position Assurance (3).
3. Install the Steering Wheel Inflatable Restraint module (2).

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Tighten the Steering Wheel Inflatable Restraint Module bolts (3, 9).

Tighten
Tighten the bolts to 8.8 N.m (78 lb in).

5. Install the steering wheel opening covers (4, 8).
6. Enable the SIR system.