Flywheel, M/T

Engine Flywheel Bolts
- Tighten the engine flywheel bolts first pass in sequence to 20 Nm (15 lb ft).
- Tighten the engine flywheel bolts second pass in sequence to 50 Nm (37 lb ft).
- Tighten the engine flywheel bolts final pass in sequence to 100 Nm (74 lb ft).

Engine Flywheel Inspection Cover Retaining Bolts: 25 Nm (18 lb ft)
Driveline Support Assembly To Engine Flywheel Housing Bolts: 50 Nm (37 lb ft)