Brake Caliper Mounting Plate Replacement
REMOVAL PROCEDURE1. Raise the vehicle and support.
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
3. Remove the guide pin bolts.
4. Remove the brake caliper housing.
5. Install a wheel nut to retain the brake rotor.
6. Remove the brake caliper mounting bracket bolts and washers.
7. Discard the brake caliper mounting bracket bolts.
8. Remove the brake caliper mounting bracket from the knuckle.
9. Clean all the bolt adhesive residue from the brake caliper mounting bracket and the knuckle mating surfaces.
INSTALLATION PROCEDURE
1. Install the brake caliper mounting bracket to the knuckle.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the two new brake caliper mounting bracket bolts and washers. The new brake caliper mounting bracket bolts will come with an adhesive already applied to the threads.
- Tighten the front brake caliper mounting bracket bolts to 175 Nm (125 ft. lbs.).
3. Check the torque on both of the brake caliper mounting bracket bolts immediately.
4. Install the brake caliper housing.
5. Install the caliper guide pin bolts.
- Tighten the brake caliper guide pin bolts to 31 Nm (23 ft. lbs.).
6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
7. Lower the vehicle.