Removal Procedure
1. Remove the console.2. Carefully pry off the shift control knob button.
3. Pry the shift control knob retainer out of the slots and remove the retainer.
4. Unscrew the shift control knob.
5. Grasp the sides of the shift control boot and apply light pressure in toward the shift control lever to begin to release the shift boot retaining tabs from the I/P accessory trim plate.
6. Using light pressure, continue to release the remaining boot retaining tabs.
7. Lift the boot away from the trim plate and remove the boot.
8. Remove the I/P accessory trim plate.
9. Remove the shift control closeout boot retaining nuts.
10. Remove the shift control closeout boot.
11. Place the shifter into NEUTRAL.
12. Press down to engage the shift control neutral lock pin.
13. Remove the transmission shift rod clamp bolt.
14. Remove the shift control mounting bolts.
15. Raise the shift control to release the locator from the shifter bracket on the side of the driveline support assembly.
16. Release the shift control from the transmission shift rod clamp and remove the shift control assembly.