Windshield Washer Reservoir: Service and Repair

Description:

Remove or Disconnect
1. Negative battery cable from battery.
. Connector (1) from washer pump (2).
3. Hose (3) from washer pump (2).
4. Two screws (4), screw (5), and washer solvent container assembly (6) from vehicle.
5. Air induction assembly (7) and two retainers (8) from washer solvent container assembly (6).

Install or Connect

NOTICE: Refer to Fastener Notice.

1. Air induction assembly (7) on washer solvent container assembly (6) with two retainers (8).
2. Washer solvent container assembly (6) on vehicle with two screws (4) and screw (5).

Tighten
- Screws to 10 N.m (88 lb. in.).
3. Hose (3) to washer pump (2).
4. Connector (1) to washer pump (2).
5. Negative battery cable to battery.