3T40

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Cable at transaxle selector lever.
3. Cable at transaxle cable bracket.
4. Center Console. Refer to Body and Frame.
5. Cable at shift control assembly.
6. Cable grommet at cowl.
7. Cable from Vehicle.

INSTALL OR CONNECT
1. Cable through cowl and carpet.
2. Cable Grommet and bolts in cowl.

Tighten
- Grommet bolts to 1.9 Nm (17 lb in).

3. Cable at shift control assembly.
4. Center control. Refer to Body and Frame.
5. Cable at transaxle cable brackets.
6. Cable at transaxle selector lever.
7. Negative battery cable.
8. Adjust cable.

Adjust
1. Place shift lever in "Neutral".
- Neutral can be found by rotating the selector shaft clockwise from Park through Reverse to Neutral.
2. Place shift control assembly in "Neutral".
3. Push tab on cable adjuster to adjust cable in cable mounting bracket.