Operation CHARM: Car repair manuals for everyone.

Catalytic Converter: Service and Repair






CAUTION: When a flex decoupler joint is moved from the normal mounting position it is possible to over-flex and damage the joint. Always support the flex decoupler joint and pipe assembly to avoid over-flexing. The flex decoupler joint is designed to flex a maximum of six degrees which is equivalent to the pipes connected to the joint moving no more than 1 inch for every 1 foot length of pipe, (if the pipe connected to the joint is 3 feet long, the end of the pipe could be moved a maximum of 3 inches).

REMOVAL PROCEDURE
1. Raise and support vehicle.
2. Support three way catalytic converter.
3. Intermediate pipe from three way catalytic converter.
4. Exhaust manifold pipe assembly from exhaust manifold.
5. Exhaust manifold and three way catalytic converter seals.
6. Clean flange surfaces.

INSTALLATION PROCEDURE
1. Exhaust manifold and three way catalytic converter seals.
2. Exhaust manifold pipe assembly to exhaust manifold.
3. Intermediate pipe to three way catalytic converter.
4. Lower vehicle.