Crankshaft Position Sensor: Description and Operation
Crankshaft And Camshaft Position Sensor Assemblies:
3X CRANKSHAFT POSITION SENSOR
The 3X signal crankshaft position sensor assembly inserts through the right side of the engine block at mid- engine, near the crankshaft reluctor ring. Notches in the crankshaft reluctor ring trigger the magnetic pickup sensor to provide timing information to the PCM. This is a hall-effect sensor.
24X CRANKSHAFT POSITION SENSOR
The 24X signal crankshaft position sensor assembly is mounted to the engine front cover assembly and is partially behind the crankshaft balancer assembly. This sensor reads 24 notches in the crankshaft balancer assembly for crankshaft position and is used for ignition control during engine cranking and improved idle control. The PCM uses the 24X signal crankshaft position sensor assembly to improve spark accuracy at speeds below 1200 rpm, and influence fuel delivery at speeds below 2000 rpm. This is also a hall-effect sensor.