A/C Signal: Description and Operation
A/C Control Circuit Diagram:
PURPOSE AND OPERATION
The A/C compressor clutch is controlled by the PCM through the Compressor clutch relay. The relay gets battery power and energizes when the PCM completes the relay coil circuit to ground. This closes the relay switch and applies power to the compressor clutch, engaging it. The heater-A/C control assembly signals the PCM when the A/C is requested. The PCM uses this request signal to engage the A/C compressor and anticipate the addition load on the engine. Compressor clutch operation is delayed slightly allowing the PCM to modify the signal to the Idle Air Control (IAC) valve for idle speed control to compensate for the additional engine load.