Operation CHARM: Car repair manuals for everyone.

Power Steering Pressure Pipe/Hose Replacement



Power Steering Pressure Pipe/Hose Replacement (LS6)
Removal Procedure





1. Place a drain pan under the vehicle.
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Computers and Control Systems - 5.7L.
3. Remove the front air deflector. Refer to Air Deflector Replacement - Front in Body and Frame.
4. Remove the power steering pressure hose line bolt from the generator.
5. Disconnect the power steering pressure line from the power steering pump.





6. Raise and support the vehicle. Refer to Vehicle Lifting.
7. Disconnect the power steering pressure line from the power steering gear.





8. Remove the power steering pressure line to cradle bolt.
9. Remove the power steering pressure line from the vehicle.

Installation Procedure





1. Important: Loosely install the pressure line and retainers before tightening.

Install the power steering pressure line.
2. Loosely install the power steering pressure line to cradle bolt.





3. Important: Install a new seal on the power steering pressure line before installing to the power steering gear.

Loosely connect the power steering pressure line to the power steering gear.





4. Lower the vehicle.

5. Important: When installing the power steering pressure line into the power steering pump a distinct click should be heard when the line is fully seated.

Notice: Connect the power steering pressure line to the power steering pump.

Tighten the fitting to 40 Nm (30 ft. lbs.).
6. Install the power steering pressure line bolt to the generator.
^ Tighten the pressure line to generator bolt to 9 Nm (80 inch lbs.).
^ Tighten the pressure line to cradle bolt to 9 Nm (80 inch lbs.).
^ Tighten the pressure line to gear fitting to 30 Nm (22 ft. lbs.).
7. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Computers and Control Systems - 5.7L.
8. Remove the drain pan from under the vehicle.
9. Bleed the power steering system.
10. Install the front air deflector. Refer to Air Deflector Replacement - Front in Body and Frame.