Brake Rotor Replacement
Removal Procedure1. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
2. Remove the brake caliper assembly. Refer to Brake Caliper Replacement - Front or Brake Caliper Replacement - Rear.
3. Remove the caliper bracket. Refer to Brake Caliper Bracket Replacement.
4. Remove the brake rotor.
Installation Procedure
Important: Whenever the rotor has been separated from the wheel bearing flange, clean any rust or contaminants from the wheel bearing flange and the brake rotor mating surfaces. Failure to do this may result in increased lateral runout of the rotor, and brake pulsation.
1. Clean the mating surfaces on the rotor and the wheel bearing flange.
2. Install the caliper bracket. Brake Caliper Bracket Replacement.
3. Install the rotor over the wheel studs onto the wheel bearing flange.
4. Install the brake caliper assembly. Refer to Brake Caliper Replacement - Front or Brake Caliper Replacement- Rear.
5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation