Brake Caliper Bracket Replacement
Repair Procedure1. Remove the caliper. Refer to Brake Caliper Replacement - Front or Brake Caliper Replacement- Rear.
2. Remove the brake pads from the caliper anchor bracket.
3. Remove the caliper anchor bracket bolts.
4. Remove the anchor bracket.
Installation procedure
Important: Apply a few drops of GM Loctite(tm) (or equivalent) to the threads of the caliper anchor bracket bolts before installing or replace the bolts with new pre-coated bolts.
1. Install the caliper anchor bracket to the steering knuckle.
2. Install the caliper anchor bracket bolt.
- Tighten the caliper anchor bracket bolts to 185 Nm (137 lb ft).
3. Install the caliper. Refer to Brake Caliper Replacement - Front or Brake Caliper Replacement- Rear.