Fluid Pump: Service and Repair
Oil Pump Replacement
Removal Procedure
1. Remove the case side cover. Refer to Case Side Cover Replacement .
2. Remove the wiring harness as necessary.
3. Remove the oil pump to valve body bolts.
Installation Procedure
1. Install the oil pump to the valve body.
Notice: Use a torque wrench to tighten the pump to valve body bolts. Do not exceed the torque specifications.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the oil pump to valve body bolts.
Tighten the valve body bolts to 8 Nm (70 lb in).
3. Install the wiring harness, if removed.
4. Install the case side cover. Refer to Case Side Cover Replacement .
5. Fill the transaxle to the proper level. Refer to Fluid Capacity Specifications .
6. Inspect the transaxle fluid level.
7. Inspect for fluid leaks.