Operation CHARM: Car repair manuals for everyone.

System Diagnosis - Fuel Metering System

Some failures of this system will result in an Engine Cranks But Will Not Run. If this condition exists, see CHART A-3. Testing and Inspection

CHART A-3 will determine if the problem is caused by the ignition system, Powertrain Control Module (PCM) or fuel pump circuit. If it's determined to be a fuel problem, CHART A-7 should be used. This includes the injectors, pressure regulator, fuel pump and fuel pump relay. Testing and Inspection

The fuel system wiring schematic is covered in CHART A-5. Testing and Inspection

When a malfunction occurs in the fuel metering system, it usually results in either a rich or lean exhaust condition. If this condition is sensed by the oxygen sensor, the PCM will attempt to change the fuel calculation (injector pulse width) to compensate.