EGR Tube: Service and Repair

Exhaust Gas Recirculation Pipe Replacement

Removal Procedure




1. Remove the intake manifold cover.
2. Remove the air cleaner outlet duct.
3. Remove the exhaust gas recirculation (EGR) valve pipe bolt (3) and carefully pull the pipe assembly back.
4. Raise and support the vehicle. Refer to Vehicle Lifting.
5. Unscrew the EGR valve pipe assembly nut from the exhaust manifold.
6. Remove the EGR pipe (2).

Installation Procedure






Notice: Refer to Fastener Notice.

1. Install the EGR valve pipe (2) to the exhaust manifold.

Tighten the nut to 25 N.m (18 lb ft).

2. Lower the vehicle.
3. Install the EGR pipe bolt (3) to the EGR valve.

Tighten the bolt to 25 N.m (18 lb ft).

4. Install the air cleaner outlet duct.
5. Install the intake manifold cover.