Operation CHARM: Car repair manuals for everyone.

Door Components







Window Regulator, Removing and Installing






1 Lower window regulator mount

2 Nut

• To remove the window, remove at the top, but only loosen at the bottom.

3 Window Regulator

• Removing

• Door trim removed.

• The speaker is removed.

• Door inner panel cover removed=> [ Inner Door Panel Cover, Removing and Installing ] Inner Door Panel Cover, Removing and Installing

• Window regulator motor removed=> [ Removing and installing the window regulator motor ] Removing and installing the window regulator motor.

• Door glass removed=> [ Front Door Window Assembly Overview ] Front Door Window Assembly Overview

- Release the window regulator motor threaded pins and push it through the inside panel.

- Only loosen the upper nut.

- Remove the upper nut and lift the window regulator through the opening in the inner door panel toward to rear and out of the door.

4 Door

- Remove the door trim panel.

Lower window regulator mount






- Remove the lower screw - 2 - and remove the window regulator - 1 - out of the bracket - 3 - in direction of arrow.

Removing






- Window regulator motor, removing => [ Removing and installing the window regulator motor ] Removing and installing the window regulator motor.

- Remove the door window. Refer to => [ Front Door Window ] Front Door Window.

- Remove the bass speaker.

- Release the threaded pins clips - arrow - for the window regulator with an 11 mm socket by mounting the socket onto the threaded pins.

- Remove the clip - 2 - for the cable - 1 - on the inside of the inner door panel.

- Pry out the plugs - 1, 3 and 5 -.






- Remove the nuts - 2 - at the top and only loosen the nuts at the bottom.

- Remove the window regulator from the inner door panel.

- Remove the window regulator through the opening in the inner door panel toward the rear.

Installing






• Tightening specifications, refer to => [ Window Regulator Motor and Window Regulator Assembly Overview ] Window Regulator Motor and Window Regulator Assembly Overview.

Install in reverse order of removal. Note the following:

• The threaded pin clips - arrow - for the window regulator must lock into the inner door panel.

- Install the bass speaker.

- Install the door window => [ Front Door Window ] Front Door Window.

- Install the window regulator motor => [ Removing and installing the window regulator motor ] Removing and installing the window regulator motor.