Operation CHARM: Car repair manuals for everyone.

Hydraulic Control Unit






Hydraulic Control Unit






1 Bolt

• 5 Nm

2 All Wheel Drive (AWD) Pump (V415)

• Removing and installing, refer to => [ Pump ] Pump

3 O-ring

• Always replace if removed

4 Adapter

• The adapter could fall out when removing the AWD pump.

• Insert the adapter into the recesses in the hydraulic pump before installing the AWD pump.

5 Hydraulic Pump

• Consists of a guide ring, a housing and 6 pistons

• Assembling, refer to => [ Assembling the Hydraulic Pump ]

6 Ball Bearing

• Can be removed and installed by hand

7 Left Pipe

• Tighten the nuts to 30 Nm.

• Installed between the hydraulic control unit and the left chamber

• First install the nuts hand-tight

8 O-ring

• Always replace if removed

9 Oil Pressure/Temperature Sensor (G437)

• 10 Nm

• Brown connector

• Removing and installing, refer to => [ Oil Pressure/Temperature Sensor (G437) or Oil Pressure/Temperature Sensor 2 (G640) ] Oil Pressure/Temperature Sensor (G437) or Oil Pressure/Temperature Sensor 2 (G640)

10 Oil Pressure/Temperature Sensor 2 (G640)

• 10 Nm

• Black connector

• Removing and installing, refer to => [ Oil Pressure/Temperature Sensor (G437) or Oil Pressure/Temperature Sensor 2 (G640) ] Oil Pressure/Temperature Sensor (G437) or Oil Pressure/Temperature Sensor 2 (G640)

11 All Wheel Drive (AWD) Clutch Valve 2 (N446)

• Color: brown

• Removing and installing, refer to => [ Clutch Valve or Clutch Valve 2 ] Clutch Valve or Clutch Valve 2

• Installation position: The connector faces upward toward the oil pressure/temperature sensor

Do not confuse with the AWD clutch valve.

12 All Wheel Drive (AWD) Clutch Valve (N445)

• Color: black

• Removing and installing, refer to => [ Clutch Valve or Clutch Valve 2 ] Clutch Valve or Clutch Valve 2

• Installation position: The connector faces upward toward the oil pressure/temperature sensor

Do not confuse with the AWD clutch valve 2.

13 Bolt

• 2.5 Nm

14 O-ring

• Always replace if removed

• Position on the clutch valve

15 Compression Spring

• Install in the guide - item 16 - => [ (Item 16) Guide ]

16 Guide

• Installation position: The larger diameter faces the ball - item 17 - => [ (Item 17) Ball ]

17 Ball

• Insert into the guide before installing - item 16 - => [ (Item 16) Guide ]

18 Hydraulic Control Unit Housing

• With centering pins - arrows -

• The centering pins hold the hydraulic control unit and seal to the final drive housing.

19 Ball

• Insert into the hole in the shuttle valve - item 21 - => [ (Item 21) Shuttle Valve ] before installing

20 O-ring

• Always replace if removed

21 Shuttle Valve

• 8 Nm

22 Gasket

• With a screen

• Mount on the centering pins on the hydraulic control unit housing

23 Right Pipe

• Tighten the nuts to 30 Nm.

• Installed between the hydraulic control unit and the right chamber

• First install the nuts hand-tight

Assembling the Hydraulic Pump





- Insert the 6 pistons - A - into the housing - B -.

- Position the guide ring - C - so that the piston touches the collar - arrow -.

- Install the hydraulic pump - 1 - and the guide ring - 2 - into the hydraulic control unit housing.






Functional Check

- Turn the hydraulic pump - 1 - several times. Pay attention to the following when doing this:

• The hydraulic pump must not get stuck or tilt when being turned.

• All the pistons must be pulled out and pushed in.

Removing and Installing the Shuttle Valves





• Remove the AWD pump, the hydraulic pump and the ball bearing beforehand - item 6 - => [ (Item 6) Ball Bearing ].

- Remove the shuttle valves - A -. The ball - C - must be removed as well.

- Insert the ball into the hole in the shuttle valve when installing.

- Carefully install the shuttle valve with a new O-ring - B - all the way in.

• The shuttle valve must be deeper than the housing surface - arrow -. If this does not happen, then remove the valve again and adjust the position of the ball.

- Tighten the shuttle valve to the tightening specification - item 21 - => [ (Item 21) Shuttle Valve ].