Operation CHARM: Car repair manuals for everyone.

Component Location Overview






Component Location Overview

Engine Compartment, Right






1 Secondary Air Injection (AIR) Pump Motor (V101)

• Component location, refer to => [ Component Location of ]

2 Charge Air Pressure Sensor (G31) / Intake Air Temperature (IAT) Sensor (G72)

• Component location, refer to => [ Installation Location / ]

3 Ignition Coils, Cylinder Bank 1

• Ignition coil 1 with power output stage (N70)

• Ignition coil 2 with power output stage (N127)

• Ignition coil 3 with power output stage (N291)

• Removing and installing, refer to => [ Ignition Coils ] Service and Repair

4 Heated Oxygen Sensor (HO2S) (G39)

• With oxygen sensor heater (Z19)

• Component location, refer to => [ Oxygen Sensors Location, Cylinder Bank 1 (right) ]

• Connector location, refer to => [ Electrical Connectors on Right Rear of Engine ]

• Removing and installing, refer to => [ Heated Oxygen Sensor (G39) and Oxygen Sensor after Three Way Catalytic Converter (G130) ] Heated Oxygen Sensor (G39) and Oxygen Sensor After Three Way Catalytic Converter (G130)

5 Camshaft Adjustment Valve 1 (N205)

• Component location, refer to => [ Installed Location: Camshaft Position (CMP) Sensor and Exhaust Camshaft Control Valve Cylinder Bank 1 (right) ]

6 Connectors

• Connector assignment, refer to => [ Electrical Connectors on Left Rear of Engine ]

7 Oxygen Sensor (O2S) after Three Way Catalytic Converter (TWC) (G130)

• With heater for oxygen sensor 1 after catalytic converter (Z29)

• Component location, refer to => [ Oxygen Sensors Location, Cylinder Bank 1 (right) ]

• Connector location, refer to => [ Electrical Connectors on Right Rear of Engine ]

• Removing and installing, refer to => [ Heated Oxygen Sensor (G39) and Oxygen Sensor after Three Way Catalytic Converter (G130) ] Heated Oxygen Sensor (G39) and Oxygen Sensor After Three Way Catalytic Converter (G130)

8 Throttle Valve Control Module (J338)

• Component location, refer to => [ Location ]

• Removing and installing, refer to => [ Throttle Valve Control Module (J338) ] Throttle Valve Control Module (J338)

9 Intake Air Temperature (IAT) Sensor (G42) / Manifold Absolute Pressure (MAP) Sensor (G71)

• Component location, refer to => [ Installation Location / ]

• Removing and installing, refer to => [ Intake Air Temperature Sensor (G42)/Manifold Absolute Pressure Sensor (G71) ] Service and Repair

10 Secondary Air Injection (AIR) Sensor 1 (G609)

• Component location, refer to => [ Installed location: ]

11 Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 (N80)

12 Engine Speed (RPM) Sensor (G28)

• Component location, refer to => [ Location ]

• Removing and installing, refer to => [ Engine Speed Sensor (G28) ] Service and Repair

13 Knock Sensor (KS) 1 (G61)

• Component location, refer to => [ Component Location Under the Intake Manifold Lower Section, Cylinder Bank 1 (right) ]

• Connector location, refer to => [ Electrical Connectors on Right Rear of Engine ]

14 Fuel Injectors, Cylinder Bank 1

• Cylinder 1 fuel injector (N30)

• Cylinder 2 fuel injector (N31)

• Cylinder 3 fuel injector (N32)

• Removing and installing, refer to => [ Fuel Injectors ] Service and Repair

15 Engine Temperature Control Sensor (G694)

• Component location => [ Installed Location ]

16 Intake Manifold Runner Position Sensor (G336)

• Component location, refer to => [ Installed Location ]

17 Camshaft Position (CMP) Sensor (G40)

• Component location, refer to => [ Installed Location: Camshaft Position (CMP) Sensor and Exhaust Camshaft Control Valve Cylinder Bank 1 (right) ]

18 Fuel Metering Valve (N290)

• Component location, refer to => [ Component Location on the High Pressure Pump ]

19 Low Fuel Pressure Sensor (G410)

• Component location, refer to => [ Component Location on the High Pressure Pump ]

Engine Compartment, Left






1 Intake Manifold Runner Position Sensor 2 (G512)

• Component location, refer to => [ Installed Location ]

2 Engine Coolant Temperature (ECT) Sensor (G62)

• Component location, refer to => [ Location ]

3 Fuel Pressure Sensor (G247)

• 22 Nm

• Oil the thread

• Component location, refer to => [ Component Location Under the Intake Manifold Lower Section, Cylinder Bank 2 (left) ]

4 Knock Sensor (KS) 2 (G66)

• Component location, refer to => [ Component Location Under the Intake Manifold Lower Section, Cylinder Bank 2 (left) ]

• Connector location, refer to => [ Electrical Connectors on Left Rear of Engine ]

5 Fuel Injectors, Cylinder Bank 2

• Cylinder 4 Fuel Injector (N33)

• Cylinder 5 Fuel Injector (N83)

• Cylinder 6 Fuel Injector (N84)

• Removing and installing, refer to => [ Fuel Injectors ] Service and Repair

6 Control Valve Control Unit (J808)

• Component location, refer to => [ Installation Location ]

• Removing and installing, refer to => [ Control Valve Control Unit (J808) ] Control Valve Control Unit (J808)

7 Secondary Air Injection (AIR) Solenoid Valve (N112)

• Component location, refer to => [ Installed Location: Secondary Air Injection Solenoid Valve ]

8 Intake Manifold Runner Control (IMRC) Valve (N316)

• Component location, refer to => [ Installed Location: Secondary Air Injection Solenoid Valve ]

9 Secondary Air Injection (AIR) Solenoid Valve 2 (N320)

• Component location, refer to => [ Installed Location: Secondary Air Injection Solenoid Valve ]

10 Connectors

• Connector assignment, refer to => [ Electrical Connectors on Left Rear of Engine ]

11 Oxygen Sensor (O2S) 2 after Catalytic Converter (G131)

• With heater for O2S 2 after catalytic converter (Z30)

• Component location, refer to => [ Oxygen Sensors Location, Cylinder Bank 2 (left) ]

• Connector location, refer to => [ Electrical Connectors on Left Rear of Engine ]

• Removing and installing, refer to => [ Heated Oxygen Sensor 2 (G108) and Oxygen Sensor 2 after Catalytic Converter (G131) ] Heated Oxygen Sensor 2 (G108) and Oxygen Sensor 2 After Catalytic Converter (G131)

12 Engine Malfunction Lamp

• Inside the instrument cluster

13 Accelerator Pedal Position Sensor (G79) / Accelerator Pedal Position Sensor 2 (G185)

• In accelerator pedal module, component location, refer to => [ Component Location / ]

14 Brake Lamp Switch (F) / Brake Pedal Switch (F47)

• Component location, refer to => [ Component Location ]

15 Engine Control Module (ECM) (J623)

• Component location, refer to => [ Component Location ]

• Removing and installing, refer to => [ Engine Control Module (J623) ] Engine Control Module (J623)

16 Camshaft Adjustment Valve 2 (N208)

Component location, refer to => [ Installed Location: CMP Sensor and Exhaust Camshaft Control Valve Cylinder Bank 2 (left) ]

17 Heated Oxygen Sensor (HO2S) 2 (G108)

• With O2S 2 heater (Z28)

• Component location, refer to => [ Oxygen Sensors Location, Cylinder Bank 2 (left) ]

• Connector location, refer to => [ Electrical Connectors on Left Rear of Engine ]

• Removing and installing, refer to => [ Heated Oxygen Sensor 2 (G108) and Oxygen Sensor 2 after Catalytic Converter (G131) ] Heated Oxygen Sensor 2 (G108) and Oxygen Sensor 2 After Catalytic Converter (G131)

18 Ignition Coils, Cylinder Bank 2

• Ignition coil 4 with power output stage (N292)

• Ignition coil 5 with power output stage (N323)

• Ignition coil 6 with power output stage (N324)

• Removing and installing, refer to => [ Ignition Coils ] Service and Repair

19 Oil Pressure Regulation Valve (N428)

• Component location, refer to => [ Installation Location ]

20 Charge Air Coolant Pump (V188)

• Component location, refer to => [ Location ]

21 After-Run Coolant Pump (V51)

• Depending on the vehicle equipment level or the country

• Component location, refer to => [ Location ]

22 Intake Air Temperature (IAT) Temperature Sensor 2 (G430) / Charge Air Pressure Sensor 2 (G447)

• Component location, refer to => [ Installation Location / ]

23 Cylinder Head Coolant Valve (N489)

24 Camshaft Position (CMP) Sensor 2 (G163)

• Component location, refer to => [ Installed Location: CMP Sensor and Exhaust Camshaft Control Valve Cylinder Bank 2 (left) ]

Component Location Engine Control Module (J623)





• - 1 - inside the plenum chamber on the left side.

Component Location Accelerator Pedal Position Sensor (G79) / Accelerator Pedal Position Sensor 2 (G185)





• Inside the accelerator pedal module

• The accelerator pedal position sensor and accelerator pedal position sensor 2 are part of the accelerator pedal module and cannot be replaced separately.

Component Location Brake Lamp Switch (F)





• Inside the footwell at the brake pedal

Removing and installing

Electrical Connectors on Right Rear of Engine





1. For cylinder bank 1 fuel injectors

2. For the throttle valve control module (J338)

3. For Knock Sensor (KS) 1 (G61)

4. For the Heated Oxygen Sensor (HO2S) (G39) with Oxygen Sensor (O2S) Heater (Z19)

5. For O2S after three way catalytic converter (G130) with heater for O2S 1 after catalytic converter (Z29)


Electrical Connectors on Left Rear of Engine





1. For O2S 2 after catalytic converter (G131) with heater for O2S 2 after catalytic converter (Z30)

2. For the HO2S 2 (G108) with O2S 2 heater (Z28)

3. For cylinder bank 2 fuel injectors and fuel pressure sensor (G247)

4. To Knock Sensor (KS) 2 (G66)


Oxygen Sensors Location, Cylinder Bank 1 (right)





1. Heated oxygen sensor (G39) with O2S heater (Z19)

2. O2S after three way catalytic converter (G130) with heater for O2S 1 after catalytic converter (Z29)


Oxygen Sensors Location, Cylinder Bank 2 (left)





1. HO2S 2 (G108) with O2Sr 2 heater (Z28)

2. O2S 2 after catalytic converter (G131) with heater for O2S 2 after catalytic converter (Z30)


Component Location on the High Pressure Pump





• At right side of the cylinder head

1. Low fuel pressure sensor (G410)

2. Fuel metering valve (N290)


Component Location Under the Intake Manifold Lower Section, Cylinder Bank 1 (right)





1. Cylinder 1 fuel injector (N30)

2. Cylinder 2 fuel injector (N31)

3. Cylinder 3 fuel injector (N32)

4. KS 1 (G61)


Installed Location Engine Temperature Control Sensor (G694)





• - 1 - under the lower intake manifold, cylinder bank 1 (right side)

Component Location Under the Intake Manifold Lower Section, Cylinder Bank 2 (left)





1. Cylinder 6 fuel injector (N84)

2. Cylinder 5 fuel injector (N83)

3. Cylinder 4 fuel injector (N33)

4. Fuel pressure sensor (G247)

5. KS 2 (G66)


Location Throttle Valve Control Module (J338)





• Behind, on the supercharger

Installation Location Control Valve Control Unit (J808)





• - 3 - on the back of the compressor.

Installed Location Intake Manifold Runner Position Sensor (G336)





• - 1 - at the front, on the right side of the lower intake manifold

• Intake manifold runner position sensor 2 (G512) is installed as a mirror image.

Installation Location Intake Air Temperature (IAT) Sensor (G42) / Manifold Absolute Pressure (MAP) Sensor (G71)





• behind, on the compressor with the charge air cooler.

1. Connector for IAT sensor / MAP sensor


Installation Location Charge Air Pressure Sensor (G31) / Intake Manifold Temperature Sensor (G72)





• On the right side, on the supercharger with the charge air cooler.

1. Connector for charge air pressure sensor / intake manifold temperature sensor


• The IAT temperature sensor 2 (G430) / charge air pressure sensor 2 (G447) are arranged as mirror image of each other.

Installed Location: Camshaft Position (CMP) Sensor and Exhaust Camshaft Control Valve Cylinder Bank 1 (right)





1. Camshaft adjustment valve 1 (N205)

2. CMP sensor (G40)


Installed Location: CMP Sensor and Exhaust Camshaft Control Valve Cylinder Bank 2 (left)





1. Camshaft Position Sensor 2 (G163)

2. Camshaft Adjustment Valve 2 (N208)


Installation Location Oil Pressure Regulation Valve (N428)





• - 4 - on the left side at the bottom of the engine.

Engine Coolant Temperature (ECT) Sensor (G62) Location





• At front on engine.

1. Connector for coolant temperature sensor (G62)

Location Charge Air Cooling Pump (V188)





• Inside the left front wheel housing

2 Charge air cooling pump connector

Location After-Run Coolant Pump (V51)





• Left side, at the front, on the engine

2 After-run coolant pump connector

Location Engine Speed (RPM) Sensor (G28)





• At the bottom of the timing chain guard lower section

2 Engine speed sensor (G28) connector

Installed Location: Secondary Air Injection Solenoid Valve and Intake Manifold Runner Control (IMRC) Valve (N316)





• behind, on the compressor with the charge air cooler.

1. AIR solenoid valve (N112)

2. IMRC Valve (N316)

3. AIR solenoid valve 2 (N320)


Component Location of AIR Pump Motor (V101)





• Inside the right front wheel housing.

4 AIR pump motor connector

Installed location: AIR Sensor 1 (G609)





• On the back of the engine.

1. AIR sensor 1 connector