Flush-Bonded Windows

Rear Window Assembly Overview, Sedan






1 - Rear window

• Distance - a - to upper window edge = 2 mm

• Distance - b - to side window edge = 2 mm, align if necessary.

2 - Adhesive sealing material

• Spacing to window edge along circumference 16 mm

• Bead cross section

• Bead width = 8 m ± 2 mm

• Bead height = 12 mm ± 3 mm

3 - Cover profile

• No replacement part.

4 - Spacer

• Note different heights for standard glass and tinted glass.

• Adhere spacer onto markings at lower window edge.

5 - Adhesive stop profile

• Adhere next to vertical rear window defrosting strips

• Place inner edge of adhesive stop profile to outer edge of distributing wire for rear window heater and press on.

Adhere Adhesive Stopper Profile





- Must be adhered before window adhesive, near rear window heater distributing wire

- Place inner edge of adhesive stopper profile - 2 - to outer edge of distributing wire for rear window heater and press on.

- Adhere spacer - 3 - onto rear window - 1 - according to the markings.