System Specifications
Cylinder Head Bolts
Replace bolts
First pass: Bolts 1-12 Hand tight
Second pass: Bolts 1-12 30 Nm
Third pass: Bolts 1-12 60 Nm
Fourth pass: Bolts 1-12 Tighten an additional 90°
Fifth pass: Bolts 1-12 Tighten an additional 90°
Sixth pass: Bolts with arrows 11 Nm
Final pass: Bolts with arrows Tighten an additional 90°
Cylinder Head Distortion
Maximum permissible warpage 0.1 mm
Reworking Dimension
Minimum dimension - a - 139.5 mm
Camshaft Bearing Guide Frame Bolts
Please refer to Valvetrain Assembly Overview for camshaft bearing guide frame bolt tightening sequence and specifications. Valvetrain Assembly Overview
Intake Manifold Upper Section Bolts Specifications
Intake Manifold Lower Section Bolts Specifications
Exhaust Manifold Nuts Specifications
Camshaft Adjuster Bolts Camshaft Timing Chains Assembly Overview