Operation CHARM: Car repair manuals for everyone.

Window Regulator







Window Regulator






1 Lower Window Regulator Mount

2 Window Regulator

• Removing

• Remove door trim.

- Remove the bass speaker.

• Window regulator motor removed. Refer to=> [ Window Regulator Motor ] Window Regulator Motor.

• Door glass removed. Refer to=> [ Front Door Window Assembly Overview ] Front Door Window Assembly Overview

• Door cover removed. Refer to=> [ Door Cover ] Door Cover

- Release the window regulator motor threaded pins and push it through the inside panel.

- Only loosen the upper nuts.

- Remove the lower nuts and lift the window regulator out of the key holes.

- Remove the window regulator through the opening in the door inner panel.

3 Nut

• 6 Nm

• For removing the window regulator, only loosen the top, remove the bottom.

Removing





- Window regulator motor removing, refer to => [ Window Regulator Motor ] Window Regulator Motor.

- Remove the door window. Refer to=> [ Front Door Window ] Front Door Window.

- Remove the bass speaker.

- Release the threaded pins clips - arrow - for the window regulator with an 11 mm socket by mounting the socket onto the threaded pins.

- Remove the clip - 1 - for the cable - 2 - from the inner side of the cable guide - 1 -.

- Remove the seals - 1- and -3 -.





- Remove the upper and lower nuts - 2 -.

- Lift the window regulator - 4 - from the door through the cutout in the door inner panel.

Installation





• Tightening specifications, refer to=> [ Window Regulator Motor and Regulator Assembly Overview ] Window Regulator Motor and Regulator Assembly Overview.

• The threaded pin clips - arrow - for the window regulator must lock into the inner door panel.

- Install the bass speaker.

- Install the door window. Refer to => [ Front Door Window ] Front Door Window.

- Install the window regulator motor. Refer to => [ Window Regulator Motor ] Window Regulator Motor.