Operation CHARM: Car repair manuals for everyone.

Modular Wiring Routing, From 07.2006, Assembly Overview






Standard Front Seats

• From 07.2006, the usual wiring harness routing to connector station under front seat => [ Connectors, Disconnecting ] has been replaced with modular wiring routing => [ Modular Wiring Routing, from 07.2006, Assembly Overview ].

• The modular wiring routing has not been implemented for all countries.

Modular Wiring Routing, from 07.2006, Assembly Overview

• The modular wiring routing has not been implemented for all countries.

• Check version of front seat and of vehicle and perform repairs accordingly.

• Note the two possible versions of the modular wiring routing, Modular Light or Modular => [ Modular Wiring Routing Versions ].





1 Front seat

2 Cable clip

• For securing corrugated tube to seat pan

3 Bolt

• 3.5 Nm

4 Cable bracket

• Note location => [ Modular Wiring Routing with Corrugated Tube on Front Seat ]

5 Corrugated tube

• Lower shell

• Note location => [ Modular Wiring Routing with Corrugated Tube on Front Seat ]

6 Corrugated tube

• Upper shell

• Note location => [ Modular Wiring Routing with Corrugated Tube on Front Seat ]

7 Wiring harness

• Observe notes for routing wiring harness in corrugated tube => [ Modular Wiring Routing with Corrugated Tube on Front Seat ]