Procedures
Control Module For Parking Aid -J446-, Removing And Installing
Removing
- If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault Finding" routine.
- VAS 5051 Vehicle Diagnostic Testing and Information system must be used for this purpose.
CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- Remove left luggage compartment side trim cover -arrows-.
- Remove nuts -arrows-.
- Disconnect electrical connectors -2-.
- Remove control module -1-.
Installing
Install in reverse order of removal.
Tightening torque
Component Nm
Control module to body 1.8