Main Fuse Panel In Right A-Pillar, Removing and Installing

Main Fuse Panel In Right A-pillar, Removing And Installing

Removing
- Disconnect battery.
- Remove A-pillar trim.
- Fold back floor covering.







- Fold cover -2- aside.
- Remove nuts -1- and -3-.
- Remove nut -4- for battery cable.
- If necessary, remove fuse box from bulkhead.







NOTE: Fuse assignments

Installing
Install in reverse order of removal, noting the following:
- Reconnect battery.

Tightening torques

Component Nm
Electrical wire to fuse box (M6) 7.5
Battery cable to fuse box 20