Operation CHARM: Car repair manuals for everyone.

With Manufacturer's Scan Tool




Misfire recognition, checking

Test sequence

- Connect Vehicle Diagnostic, Testing and Information System VAS5051 or VAG 1551 Scan Tool and select engine electronics control module by entering address word "01". When doing this the engine must be at idle.

Indicated on display

Rapid data transfer HELP
Select function XX


- Press buttons -0- and -8- to select function "Read Measuring Value Block" and confirm entry with -Q- button.

Indicated on display

Read Measuring Value Block
Input display group number XXX

- Press buttons -0-, -1- and -4- to select "display group number 014" and confirm entry with -Q- button.

Indicated on display

Read Measuring Value Block 14 ->
1 2 3 4


- Check misfire recognition.

If specified value is reached:
- Press -> button .

Indicated on display (select function)

Rapid Data Transfer HELP
Select function XX


Evaluation display group 003