Operation CHARM: Car repair manuals for everyone.

Right Combination Valve Removing and Installing




Right Combination Valve For Secondary Air Injection, Removing And Installing

Removing







- Remove rear engine cover (arrows).







- Remove cover -1- in engine compartment (right side).







- Remove bolts for holding plate -3- for solenoid valves (arrows).
- Disconnect intake air hose -1- at Mass Air Flow (MAF) sensor.
- Disconnect hose -4- from air guide -2-.







- Remove bolt (arrow) and disconnect air guide -2- at throttle valve control module.
- Disconnect hose -1- from air guide if installed.


NOTE: Illustration depicts air guide with the removed engine from rear.







- Unscrew bolts -1- and -2- and remove combination valve.
- Disconnect vacuum hose (arrow).

Installing
Installation is reverse of removal, noting the following:


NOTE: Replace gaskets and O-rings.


Tightening torques

Component Nm
Combination valve to cylinder head 10
Connecting tube to combination valve 10