Operation CHARM: Car repair manuals for everyone.

Power Steering Fluid Level, Checking



Power steering fluid level, checking

^ With engine not running, bring front wheels into straight-ahead position.

Fluid, when cold:
^ Remove cap.
^ Clean off dipstick with a clean rag.
^ Tighten cap by hand and remove again.

Note: Fluid level is only valid if cap has been screwed on.





^ Check oil level: Fluid level must be near -MIN- marking (up to 2 mm above or below marking).

Fluid, at operating temperature (from approximately 50°C):
^ Check oil level: Fluid level must be between "MIN" and "MAX" markings.

Note:
^ If fluid level is above specified range, oil must be drained.
^ If fluid level is below specified range, hydraulic system must be checked for leaks. It is not enough to simply top off with fluid.
^ Do not reuse fluid you have drained.