Front
Front brake caliper, disassembling/assemblingPiston, removing from caliper housing with compressed air
Note: Place a wooden block in caliper housing to prevent damage to piston. Use only enough air pressure to force piston out. The piston may release suddenly.
Piston seal, removing
carefully pry out seal with screwdriver
CAUTION: Do not damage cylinder bore. If piston or cylinder bore is pitted, scored or corroded, affected part must be replaced.
Piston outer seal, installing on piston
Piston outer seal, installing
hold piston against cylinder and carefully insert inner sealing lip into groove of cylinder with a screwdriver
Piston, installing
using caliper press US 1023/4. press piston in
CAUTION: Lip of outer seal must slip into groove of piston.