Power Windows Automatic Closing System - Troubleshooting
9228audi01
Group: 64
Number: 92-01
Date: May 31, 1992
Subject:
Power Windows with Automatic Window Closing
(Comfort) System, Troubleshooting
Model(s):
100 CS, S4
1992 m.y.
Power windows with automatic window closing (comfort) system, troubleshooting
Note
Always refer to appropriate wiring diagram when troubleshooting.
General description
Check the following first before troubleshooting power windows:
^ ensure customer is operating power windows according to owner's manual
^ determine if one or more power windows are not functioning or if automatic close function is not working
^ ensure window lock-out switch is ON (if switch is OFF, rear windows cannot be operated from rear doors)
^ ensure retained power supply (ignition OFF) for windows is interrupted by opening the driver or passenger front door
Note
Refer to appropriate troubleshooting section for diagnosis of the anti-theft alarm system, time-delay interior lighting system or central locking system.
Power window/sunroof control unit, J 139
Controls the following:
^ one-touch driver's window operation (relay is energized approximately eight seconds during window operation)
^ automatic closing of windows and sunroof in conjunction with automatic window closing relay (comfort relay), J 261
^ controls power supply at terminal 15 (ignition OFF) for windows and sunroof until either front door is opened
Automatic window closing relay (comfort relay), J 261
^ controls automatic closing of windows in conjunction with the power window/ sunroof control unit, J 139 when door lock cylinder switches are activated
Circuit breakers
^ individual circuit breakers installed in each window motor to protect motor from overloading due to sticking switches or excessive current
Note
If circuit breaker opens because of excessive current draw, it will reset itself.
Power windows, component locations
Test conditions and tools required
Window motor current draw - installed, checking
B - Driver's window switch, checking
C - Automatic "one touch down" function, checking
D - Rear window lockout safety switch, checking
E - Rear window operating switches, function, voltage supply, checking
F - Right front door operating switch, function, voltage supply, checking
G - Power window control unit (J 139), checking voltage supply
H - Door contact switch, checking continuity to control unit (J 139)
Power window circuit breakers, checking
A - Test conditions/Front door lock cylinder switches, checking
B - Automatic window closing relay (J 261) power supply, checking
C - Automatic window closing relay (J 261) control circuits, checking