Pinout Values and Diagnostic Parameters
Test Harness Installation
If the inspection for a particular failure code requires the system checker harness, remove the front passenger seat and connect the system checker harness and multimeter as shown. Then check the system according to the procedure described for the appropriate code(s).
Electrical Troubleshooting
CAUTION:
Puncturing the insulation on a wire can cause poor or intermittent electrical connections.
For testing at connectors other than the system checker harness, bring the tester probe into contact with the terminal from the connector side of wire harness connectors in the engine compartment. For female connectors, just touch lightly with the tester probe and do not insert the probe.