Ignition Switch (D)

Ignition Switch (D)


• Risk of airbag deployment!

• The airbag could deploy if the airbag unit is handled incorrectly.

• Read all the Safety Precautions before working on the airbag.


Always follow the instructions regarding disconnecting and connecting the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

Removing

- Disconnect the battery. Refer to => [ Battery, Disconnecting ] Battery, Disconnecting.

- Remove the steering wheel.

- Remove the steering column trim.

- Disconnect the connector - 2 - from the Ignition Switch - 1 -.






- Unlock the ignition switch with a small screwdriver - arrows -.

- Remove the ignition switch - 1 - from the steering lock housing.

Installing

- Install the ignition switch in the steering lock housing until it audibly latches.

- Insert ignition key into lock cylinder and turn into position Drive.

Lock Cylinder Key Positions





1. Off

2. Run

3. Start


- Connect the battery. Refer to => [ Battery, Connecting ] Battery, Connecting.

Further installation is done in reverse order of removal.

Check the Ignition Switch, refer to => [ Ignition Switch, Checking ] Testing and Inspection.