Left Power Seat Trim

Left Power Seat Trim

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Switch off ignition.

- Press clamping pin - 1 - inward and remove the clip - 2 -.

- Pull rear trim - 3 - outward and then swing trim downward - arrow A -.

- Remove rear trim from seat.

- Pull front trim - 4 - upward and then swing trim outward - arrow B -.

- Push front trim toward rear - arrow C -.

- Remove front trim from seat and disconnect wiring harnesses from switches - 5 -.






Installing

- Install in reverse order of removal.