Operation CHARM: Car repair manuals for everyone.

Front Wheel Housing Liner Overview






Front Wheel Housing Liner Overview

The description also applies to Volkswagen Golf R

• The following describes removing and installing the left wheel housing liner. Removing and installing the right wheel housing liner is identical.

• Slight changes may have to be made to removal and installation procedures, depending upon Golf R engines installed in vehicle and only for "19" wheel rims".

• Vehicles with an anti-rodent system, refer to => [ Anti-Rodent System Overview ] Anti-Rodent System Overview.

• The illustration shows a left fender. The right fender is identical.






1 Rear Part of Wheel Housing Liner

• PP/EPDM material

• Removing and installing, refer to => [ Front Wheel Housing Liner ] Front Wheel Housing Liner.

2 Bolt

• Tightening specification: 2 Nm

• Quantity: 7

• Different quantity is possible

• The upper bolt must not be in the fender when installing the rear section of the wheel housing liner on Golf R with 19" wheel rims.

3 Front Part of Wheel Housing Liner

• Material - PP/EPDM

• Altered front section of the wheel housing liner for Golf R for 19" wheel rims.

4 Bolt

• Tightening specification: 2 Nm

• Quantity: 6

5 Nut

• Quantity: 7

• Different quantity is possible

• Remove the upper expanding nut in the fender when installing the rear section of the wheel housing liner for Golf R with 19" wheel rims.