Lock Carrier

Lock Carrier with Attachments

Removing






- Perform service position of lock carrier with attachments - 1 -. Refer to => [ Service Position, Implementing ] Service Position, Implementing.

- Disconnect the electrical harness connectors present.

- Drain the coolant and disconnect the coolant line.

- Disconnect condenser lines.

- With a second technician, remove guide rod (T 10093) on longitudinal member on left and right sides and lift out lock carrier.

Do not start the engine when the A/C system or coolant lines are disconnected.

• Do not hang the condenser and hydraulic oil cooler by the lines.

• Do not kink the condenser and hydraulic lines.

Installation

Install in reverse order of removal.

• Make sure that all plug- and hose connections are corrected installed when re-assembling.

- Align the lock carrier with the longitudinal members and between the fenders.